Recently I made fall themed night light using the same technique and supplies as this faux stained glass Christmas tree night light idea.
I purchase some products at Michael’s Craft store that come in these plastic containers. The plastic container isn’t thick….only the screw top section is on the thick side. I took a photo of a stained glass tree that I sized to fit the container.
The scissors cut through the threads on the top of the container and after I cut of the top section was very easy to cut a piece that would fit my image perfectly.
Step One: Cut a piece of plastic 4″ x 3″ (I used a jar type container, but a flat piece of plastic works also.)
Step Two: Download pdf. of faux stained glass Christmas tree BELOW.
Step Three: Apply a THIN coat of Mod Podge on the plastic and put the image on the plastic, smoothing all wrinkles or air bubbles. (I used a hair dryer to quickly dry it.)
Step Four: Glue the night light assembly to the plastic.
Step Five: Us sharp scissors to cut out edges of the tree.
Step Five: After the image was cut out, I used Diamond Glaze to seal the top. Again, I used my hair dryer to make short work of the glaze setting to a shiny finished product!
This little night light would make a cute and inexpensive Christmas gift!
CLICK AND PRINT: